6063 vs 6082: which aluminium alloy is better?
Strength, extrudability, anodising and uses of alloys 6063 and 6082, side by side and with the values from the standard.
In a nutshell
- 6082 is stronger: 290 MPa tensile strength against 215 MPa, and 250 against 170 MPa yield strength.
- 6063 extrudes better (5 against 3 out of 5): it allows thinner walls, more complex shapes and a better surface finish.
- 6063 anodises better (5 against 3 out of 5).
- 6082 machines better (4 against 2 out of 5).
- 6063 resists corrosion better (5 against 4 out of 5).
- Both weld equally well (4 out of 5); as with any heat-treated alloy, the weld zone loses some of its strength.
| Property | 6063 | 6082 |
|---|---|---|
| Tensile strength (Rm) | 215 MPa | 290 MPa |
| Yield strength (Rp0.2) | 170 MPa | 250 MPa |
| Elongation (A) | 8% | 8% |
| Approximate hardness | 73 HB | 95 HB |
| Density | 2.70 g/cm³ | 2.70 g/cm³ |
| Composition | Si 0.20–0.60 · Mg 0.45–0.90 · Fe ≤ 0.35 | Si 0.70–1.30 · Mg 0.60–1.20 · Mn 0.40–1.00 |
| Extrudability (1 to 5) | 5 | 3 |
| Decorative anodising (1 to 5) | 5 | 3 |
| Weldability (1 to 5) | 4 | 4 |
| Corrosion resistance (1 to 5) | 5 | 4 |
| Machinability (1 to 5) | 2 | 4 |
Values in T6 temper: minimums from the EN 755-2 standard for thin-walled profiles (they vary with thickness and shape). Approximate hardness. The 1 to 5 ratings compare these alloys with each other.
- Choose 6063The alloy for aluminium windows and doors: windows, doors, façades, railings, furniture and architectural profiles.
- Choose 6082The strongest of the 6000 series: structures, bridges, cranes, scaffolding, trailers and highly stressed parts.
Still not sure which to use?
Tell us what you are going to make and we will recommend the right alloy, temper and finish.
The message is put together with what you are looking at, with no obligation.
Frequently asked questions
Which is stronger, 6063 or 6082?
6082: in T6 temper it has a minimum tensile strength of 290 MPa, against 215 MPa for 6063 (EN 755-2 standard, thin-walled profiles).
What are 6063 and 6082 used for?
6063: the alloy for aluminium windows and doors: windows, doors, façades, railings, furniture and architectural profiles. 6082: the strongest of the 6000 series: structures, bridges, cranes, scaffolding, trailers and highly stressed parts.
Which one is better for anodising?
6063, which responds better to decorative anodising (5 out of 5 against 3).