Comparisons · Aluminium and other materials
Aluminium vs stainless steel: which is better?
Weight, strength, stiffness, corrosion and recycling of aluminium and stainless steel, side by side.
In a nutshell
- Aluminium weighs 66% less than stainless steel: 2.70 against 8.00 g/cm³.
- Stainless steel is stronger: 515 against 240 MPa tensile strength.
- Stainless steel is 2.8 times stiffer (modulus of 193 against 69 GPa): an aluminium profile needs more section to deflect the same amount.
- Both resist corrosion well: stainless steel is excellent with no finish; aluminium, with anodising or paint.
| Property | Aluminium 6063-T6 | AISI 304 stainless steel |
|---|---|---|
| Density | 2.70 g/cm³ | 8.00 g/cm³ |
| Tensile strength | 240 MPa | 515 MPa |
| Modulus of elasticity (stiffness) | 69 GPa | 193 GPa |
| Thermal conductivity | 200 W/m·K | 16 W/m·K |
| Thermal expansion | 23.4 µm/m·°C | 17.3 µm/m·°C |
| Melting point | 615–655 °C | 1,400–1,450 °C |
| Corrosion | Very good: it forms a protective oxide layer; with anodising or paint, excellent. | Excellent. |
| Machinability | Good | Fair: it work-hardens when machined. |
| Recycling | It can be recycled endlessly using about 5% of the energy needed to produce it. | Recyclable. |
Typical values at room temperature: Aluminium 6063-T6 and AISI 304 stainless steel. Stiffness compares the modulus of elasticity.
- When aluminium is the better choiceWhen weight, corrosion or finish matter: light structures, windows and doors, transport, visible parts and anything that moves or is assembled by hand.
- When stainless steel is the better choiceWhen you need the highest strength or stiffness in a small section.
Still not sure which to use?
Tell us what you are going to make and we will recommend the right alloy, temper and finish.
The message is put together with what you are looking at, with no obligation.
Frequently asked questions
How much does aluminium weigh compared with stainless steel?
Aluminium weighs 66% less than stainless steel: 2.70 against 8.00 g/cm³.
Which is stronger, aluminium or stainless steel?
Stainless steel is stronger: 515 against 240 MPa tensile strength. Stainless steel is 2.8 times stiffer (modulus of 193 against 69 GPa): an aluminium profile needs more section to deflect the same amount.